You have seen plenty of videos here at Legendaryspeed presenting you fire spitting ...
You have seen plenty of videos here at Legendaryspeed presenting you fire spitting vehicles. This one is similar yet different.
The vehicle spits fire, but the recording you have the chance to see is actually the tutorial for building your own fire spitting system!
The guys from Chaotic Customs are here at your disposal to show you what you need, how to install the flame thrower kit.
They are using a 1965 Thunderbird as the model car for this presentation. Now let’s review the parts for this system.
You are going to need the coil, main module (put it where it can stay dry), sparkplugs, push button switch, bunions, wire and wire connectors and sparkplug wires as well.
First step mounting the coils. And they put them in the trunk, then drill the hole for the plug wire to reach the exhaust pipe.
Next, mounting the sparkplugs. Well, two ways to do it – with and without welding. After this, they show you how to connect a sparkplug wire with the coil. The following step is mounting a module. They are not demonstrating, instead they are showing the diagram.
After all that, check for spark, and remember not to have the engine running. By the end of the video below, you are going to get some more tips and see the procedure itself.
Legendary Speed is dedicated to bringing you the very best Videos about Automobiles and Cool stuff.